Q. I have bought 870 MB / 99 Min CD-Rs. I am using Nero5 burning software for writing. The file I'm trying to copy is 720 MB. But when I press the Burn button, the program says that there is not enough disk space. Can you tell me why?
A. In order to write beyond 80min, you have to set the "overburn" option in the Nero software as below:
1) File > Preferences > Expert Features
2) Check "enable overburn" option
3) Optionally, you can set the Red Marker to 99min for reference
However, due to certain hardware physical limitations, not all CD-R burners can allow you to write up to 99min even though you have the correct software settings. In this case, you have to check with the drive manufacturer to get the limit. Based on my experience, most CD-R writers can write at least 90mins.
If you intend to play the recorded CD-R with audio, video or CD-ROM players, some of them can't move their carriage far enough too play an OverSized CD-R. So, don't just blame your CD-R writer :)
Q. What is a "digital audio" CD-R? Is the quality better than the "data" type CD-R?
A. There is no such thing called "data" type CD-R. A general type CD-R with good quality can be perfectly used for audio, data and video recording purpose.
However, there are some stand-alone CD-R audio recorders that use only "digital audio" CD-R. The Philips CDR600 and CDR700 series audio recorders belong to this category. These recorders can detect whether the CD-R is a "digital audio" by reading its header information. If it is not "digital audio", the recorder simply refuses to write regardless of its quality. The CD-R must be 1x compatible since the audio recorders typically write data at 1x speed.
A much better way of recording music is by PC with an ordinary CD-R burning software since users can record music with a much higher speed. To get excellent audio quality, the quality of the CD-R must be excellent also (in technical terms, it's jitter and block error rate must be low).
Q. I wrote 20MB to your Business Card CD-R which is supposed to have 51MB data capacity. Later on when I tried to write another 20MB to the same disc, it didn't allow me. Can you explain why?
A. Whenever you recorded the 1st session to a disc, a lead-out blank area of size about 15MB was appended. (Leadout is used as a separator between two sessions.) Therefore, 35MB data was actually created for the session. When you tried to write another 20MB the next time, there was not enough space for another 35MB data.
Q. I heard that Silver/Blue CD-R is better for music recording and Silver/Green is better for CD-ROM recording etc. Is that true?
A. There is a lot of confusion in the market. From the manufacturer's point of view, it does not make any sense since all of them are digital data which are treated equally by the CD-R writer in the recording phase. The CD-R quality after recording is determined by how well the CD-R is manufactured as well as the quality of the chemical dye.
Q. Is it true that lower recording speed gives better result?
A. No, unless you have bought a CD-R that overstates its maximum speed. In this case you may not be able to get a good result with the maximum speed. Otherwise, just use the speed which is within the recommended range. Never try to record it with a speed that is not stated. For example, if it says 2x-12x, you should not use 1x for recording. You get poor result instead.
Q. I see many different kinds of colors for the substrate (bottom plastic layer). How is the quality?
A. They are only good for appearance but have no advantage over regular ones in terms of quality. Colored substrate makes it very hard to do quality control since most in-line QC disc scanners in the manufacturing line were designed with the clear substrate in mind. We have tested many samples from the market. Most of them show very high block error rate due to uncontrollable manufacturing process.
Q. I was told by a CD-R company in the exhibition that different substrate (plastic) colors are optimized for different recording formats ( CD-ROM, VCD, CD-Audio etc.). Is that true?
A. This is a very irresponsible claim and doesn't make any sense. The color of the substrate makes no improvement on the CD-R quality but very often makes it worse due difficulty in QC procedure (as explained above). Again, a CD-R writer do not care about the kind of data it records on the CD-R. All digital data (for games, VCD, CD-ROM or CD-Audio) are burnt with the same writing strategy. Also CD-R writers cannot recognize the color of substrate. The quality is mainly determined by the manufacturing process and the chemical dye used.
Q. Which color CD-R discs are better? 'Blue' or 'Green' or 'Diamond'?
A. The performance of a CD-R disc is not related to its color. The color of a CD-R disc is determined by the color of the dye layer and the reflective layer. No matter what the disc color is, a disc can either be good or bad depending on its manufacturing quality. In general, blue dye is sensitive to sunlight. Diamond dye (using our formula) and green dye do not react to sunligh and therefore are more stable.
Q. What is the 'Orange Book'?
A. The 'Orange Book' defines a set of standards that applies to recordable disc media. CD-R discs are required to meet the specifications as stipulated in part two of the 'Orange Book'.
Q. I get a "Buffer Under-run" error when recording to disc. What does it mean and how do I avoid this?
A. It simply means that the source data cannot be transferred fast enough to catch up with the target CD-R writer which requires continuous stream of data from the buffer. If you do a direct disc-to-disc copy, you have to make sure that the speed of source drive is fast enough to deliver continuous stream of data to the buffer. Very often, the problem comes from the source drive but not the writer itself. For high speed recording (8x and above), it is recommended to make an image on the hard disk first and do the recording later. Another reason for the error may be due to insufficient memory or CPU performance. It is best not to have other programs running and screen savers should be disabled, whilst recording. Also, when data is coming from the hard disk, it's best to make sure there isn't any unnecessary disk access by other programs during recording.
Q. How come I wasn't able to write to a 650 MB CD-R again, when I've only recorded 200 MB of material onto the disc?
A. It is likely that you've chosen the "Close Disc" or "Disc at Once" option in your previous recording to the disc. In order to write to a CD-R disc over many sessions until it's full, you should choose the option which allows you to "Close the session" and "Leave the disc open"..
Q. I've found that I wasn't able to access some of my CD-R discs and some discs have got a lot of errors after I've labeled them. Why should this happen?
A. It is likely that you've used a writing instrument with a hard tip such as a ball-point pen to label your discs. The label side of a disc generally consists of a very thin lacquer layer only. Which, acts as a protective layer for the 'data grooves' underneath. The lacquer layer can easily be scratched with anything harder than a 'H' pencil. You should use soft tipped pens such as felt-tip pens to label your discs.
Customized Packaging
We offer a stop for customizable packaging services . There is many packaging options to suit your particular presentation or delivery needs . There are options for individual retail packaging , an ideal solution for resales . Bulk packaging is also available .
Packaging Options:
Custom Insert Clamshell Packaging - Clamshell packaging with customizable inserts are best suited to meet promotional and retail needs. Used for promotion, the card-stock insert can detail the benefits of the memory product and promote your organization's initiative. For retail purposes, the insert can serve as a selling tool, listing the specifications and functionality of the media card and creating brand-awareness for your company. Inserts are available in full-color on both sides and are finished with a glossy coating. You can design the insert in-house, use our standard inserts.
Customized Retail Packaging - Our fully Customized Retail Packaging is best suited to meet promotional and retail needs. These eye-catching, full-color cardboard boxes have plenty of interior room for additional materials and accessories. Used for promotion, use the ample surface area to detail the benefits of the External Hard Drive. Promote your organization's initiative with vibrant color graphics. For retail purposes, use this space as a selling tool by listing the specifications and functionality of the product. Color graphics can further encourage brand-awareness for your company.
Gift Boxes -Especially attractive for holiday orders, our simple but elegant gift boxes come in a variety of sizes and styles to complement your customized memory products. Gift boxes with decorative bows and velvet interiors are also available. Gift box sizes and styles vary according to the product being customized.
For customers who are not interested in customized options, we are happy to ship your customized memory products in our standard packaging. Standard packaging is the default method used for all orders that don't specify customized packaging.
Custom Tooling/ Custom Clours
Custom Tooling:
Do you have an innovative idea for a brand new USB Flash Drive style? Here , we have the resources and experience to fully realize your three-dimensional idea. Your own unique style will dazzle clients and make a powerful statement. Take our customization services to the next level and separate yourself from the pack with an exclusive style. We can create a new unique Flash Drive style modeled after your flagship product, your company logo, or any other object you want. Our production process is developed by a dedicated research and development team and governed by rigorous quality-control standards. Contact a friendly Sales Representative today to discuss your custom style Flash Drive idea.
Custom Colors:
Almost every one of our products is available for Custom Coloring via offset or silkscreen printing. If our standard colors aren't quite what you need, our Custom Color service is for you. We use the Pantone Matching System to get your color just right. Contact a friendly memorit.com Sales Representative today for more information on our Custom Color service.
Services & Support
Export/Import Processing Support
We can offer transportation services with a convenient transportation network in this coastal city.
After Sales Service
we provide the best aftersales services with constant improvement: usually survey among our customers and adopt good proposals. For any problems of our products, we will feed back rapidly. Also we supply spare parts for goods.
QC/Technical Support
We carry out an advanced QC system for reliable data verification, and analytical software for systematic inspections. Each disc we product must be checked under strict photoelectricity parameter test and pass more than 18 DVD/CD players of different models. All masters are tested in a variety of playback devices before CD/DVD replication begins.
Materials/Components support
All the raw materials are sourced from brand suppliers.
Watch the video of the productions of our factory.
Click here to continue to check our products: Wholesale CDs,DVDs Records & Tapes
Please feel free to let me know if you have any items in hand to inquiry. We will be happy to give you a quotation upon receipt of your detailed requirements.Contact right now If you have any items to inquiry! We are appreciated to receive your inquiry with quantity etc which you want to buy.
please contact 377704497@qq.comorchongxonexports@hotmail.com for quotations or Direct Call us at 86-13434157889
have questions about our products and services? Check our Frequently Asked Questions below.
Still can't satified you? Send us your feedback ! or please contact 377704497@qq.com or chongxonexports@hotmail.com.for quotations or Direct Call us at 86-13434157889 ,we would be happy to help you!
Check our products click here China Blank printable CDR,DVDR Manufacturer exporting direct from China
Frequently Asked Questions
A. In order to write beyond 80min, you have to set the "overburn" option in the Nero software as below:
1) File > Preferences > Expert Features
2) Check "enable overburn" option
3) Optionally, you can set the Red Marker to 99min for reference
However, due to certain hardware physical limitations, not all CD-R burners can allow you to write up to 99min even though you have the correct software settings. In this case, you have to check with the drive manufacturer to get the limit. Based on my experience, most CD-R writers can write at least 90mins.
If you intend to play the recorded CD-R with audio, video or CD-ROM players, some of them can't move their carriage far enough too play an OverSized CD-R. So, don't just blame your CD-R writer :)
A. There is no such thing called "data" type CD-R. A general type CD-R with good quality can be perfectly used for audio, data and video recording purpose.
However, there are some stand-alone CD-R audio recorders that use only "digital audio" CD-R. The Philips CDR600 and CDR700 series audio recorders belong to this category. These recorders can detect whether the CD-R is a "digital audio" by reading its header information. If it is not "digital audio", the recorder simply refuses to write regardless of its quality. The CD-R must be 1x compatible since the audio recorders typically write data at 1x speed.
A much better way of recording music is by PC with an ordinary CD-R burning software since users can record music with a much higher speed. To get excellent audio quality, the quality of the CD-R must be excellent also (in technical terms, it's jitter and block error rate must be low).
A. Whenever you recorded the 1st session to a disc, a lead-out blank area of size about 15MB was appended. (Leadout is used as a separator between two sessions.) Therefore, 35MB data was actually created for the session. When you tried to write another 20MB the next time, there was not enough space for another 35MB data.
A. There is a lot of confusion in the market. From the manufacturer's point of view, it does not make any sense since all of them are digital data which are treated equally by the CD-R writer in the recording phase. The CD-R quality after recording is determined by how well the CD-R is manufactured as well as the quality of the chemical dye.
A. No, unless you have bought a CD-R that overstates its maximum speed. In this case you may not be able to get a good result with the maximum speed. Otherwise, just use the speed which is within the recommended range. Never try to record it with a speed that is not stated. For example, if it says 2x-12x, you should not use 1x for recording. You get poor result instead.
A. They are only good for appearance but have no advantage over regular ones in terms of quality. Colored substrate makes it very hard to do quality control since most in-line QC disc scanners in the manufacturing line were designed with the clear substrate in mind. We have tested many samples from the market. Most of them show very high block error rate due to uncontrollable manufacturing process.
A. This is a very irresponsible claim and doesn't make any sense. The color of the substrate makes no improvement on the CD-R quality but very often makes it worse due difficulty in QC procedure (as explained above). Again, a CD-R writer do not care about the kind of data it records on the CD-R. All digital data (for games, VCD, CD-ROM or CD-Audio) are burnt with the same writing strategy. Also CD-R writers cannot recognize the color of substrate. The quality is mainly determined by the manufacturing process and the chemical dye used.
A. The performance of a CD-R disc is not related to its color. The color of a CD-R disc is determined by the color of the dye layer and the reflective layer. No matter what the disc color is, a disc can either be good or bad depending on its manufacturing quality. In general, blue dye is sensitive to sunlight. Diamond dye (using our formula) and green dye do not react to sunligh and therefore are more stable.
A. The 'Orange Book' defines a set of standards that applies to recordable disc media. CD-R discs are required to meet the specifications as stipulated in part two of the 'Orange Book'.
A. It simply means that the source data cannot be transferred fast enough to catch up with the target CD-R writer which requires continuous stream of data from the buffer. If you do a direct disc-to-disc copy, you have to make sure that the speed of source drive is fast enough to deliver continuous stream of data to the buffer. Very often, the problem comes from the source drive but not the writer itself. For high speed recording (8x and above), it is recommended to make an image on the hard disk first and do the recording later. Another reason for the error may be due to insufficient memory or CPU performance. It is best not to have other programs running and screen savers should be disabled, whilst recording. Also, when data is coming from the hard disk, it's best to make sure there isn't any unnecessary disk access by other programs during recording.
A. It is likely that you've chosen the "Close Disc" or "Disc at Once" option in your previous recording to the disc. In order to write to a CD-R disc over many sessions until it's full, you should choose the option which allows you to "Close the session" and "Leave the disc open"..
A. It is likely that you've used a writing instrument with a hard tip such as a ball-point pen to label your discs. The label side of a disc generally consists of a very thin lacquer layer only. Which, acts as a protective layer for the 'data grooves' underneath. The lacquer layer can easily be scratched with anything harder than a 'H' pencil. You should use soft tipped pens such as felt-tip pens to label your discs.
We offer a stop for customizable packaging services . There is many packaging options to suit your particular presentation or delivery needs . There are options for individual retail packaging , an ideal solution for resales . Bulk packaging is also available .
Packaging Options:
Custom Insert Clamshell Packaging - Clamshell packaging with customizable inserts are best suited to meet promotional and retail needs. Used for promotion, the card-stock insert can detail the benefits of the memory product and promote your organization's initiative. For retail purposes, the insert can serve as a selling tool, listing the specifications and functionality of the media card and creating brand-awareness for your company. Inserts are available in full-color on both sides and are finished with a glossy coating. You can design the insert in-house, use our standard inserts.
Customized Retail Packaging - Our fully Customized Retail Packaging is best suited to meet promotional and retail needs. These eye-catching, full-color cardboard boxes have plenty of interior room for additional materials and accessories. Used for promotion, use the ample surface area to detail the benefits of the External Hard Drive. Promote your organization's initiative with vibrant color graphics. For retail purposes, use this space as a selling tool by listing the specifications and functionality of the product. Color graphics can further encourage brand-awareness for your company.
Gift Boxes -Especially attractive for holiday orders, our simple but elegant gift boxes come in a variety of sizes and styles to complement your customized memory products. Gift boxes with decorative bows and velvet interiors are also available. Gift box sizes and styles vary according to the product being customized.
For customers who are not interested in customized options, we are happy to ship your customized memory products in our standard packaging. Standard packaging is the default method used for all orders that don't specify customized packaging.
Custom Tooling:
Do you have an innovative idea for a brand new USB Flash Drive style? Here , we have the resources and experience to fully realize your three-dimensional idea. Your own unique style will dazzle clients and make a powerful statement. Take our customization services to the next level and separate yourself from the pack with an exclusive style. We can create a new unique Flash Drive style modeled after your flagship product, your company logo, or any other object you want. Our production process is developed by a dedicated research and development team and governed by rigorous quality-control standards. Contact a friendly Sales Representative today to discuss your custom style Flash Drive idea.
Custom Colors:
Almost every one of our products is available for Custom Coloring via offset or silkscreen printing. If our standard colors aren't quite what you need, our Custom Color service is for you. We use the Pantone Matching System to get your color just right. Contact a friendly memorit.com Sales Representative today for more information on our Custom Color service.
Export/Import Processing Support
We can offer transportation services with a convenient transportation network in this coastal city.
After Sales Service
we provide the best aftersales services with constant improvement: usually survey among our customers and adopt good proposals. For any problems of our products, we will feed back rapidly. Also we supply spare parts for goods.
QC/Technical Support
We carry out an advanced QC system for reliable data verification, and analytical software for systematic inspections. Each disc we product must be checked under strict photoelectricity parameter test and pass more than 18 DVD/CD players of different models. All masters are tested in a variety of playback devices before CD/DVD replication begins.
Materials/Components support
All the raw materials are sourced from brand suppliers.
Please feel free to let me know if you have any items in hand to inquiry. We will be happy to give you a quotation upon receipt of your detailed requirements.Contact right now If you have any items to inquiry! We are appreciated to receive your inquiry with quantity etc which you want to buy.
please contact 377704497@qq.com or chongxonexports@hotmail.com for quotations or Direct Call us at 86-13434157889